Reviews & Guides

How to Start a Snow Blower

  • Date: September 10, 2021
  • Time to read: 2 min.

How to Start a Snow Blower: Easy Step-By-Step Guide You Can Follow

Winter is here and it is probably the most beautiful time of the year. However, you can’t deny the fact that removing the snow from the driveway or sidewalk is another tedious task.

Make your work easy by getting yourself a snowblower and follow the below-mentioned steps to get it started.

How To Start A Snow Blower?

Step 1: Check-Up On the Fuel Level

You don’t want your machine to run out of oil midway. Therefore, before starting off your cleaning always check that your machine is fueled up.

The drive control should ideally be set to neutral because you don’t want to over-work your machine when it is getting started.

Step 2: Ignition Settings

Set the level of the choke to fuel. This will help the machine to mix the fuel well with the air. However, if you are using it within a gap of fewer than 5 minutes then set it to warm start setting

Increase the throttle to a fast setting. Always, keep it at this setting to get it started.

Step 3: Turn on the Fuel

Get your machine started by pressing the on button. If you are unsure about where it is then look up the user manual.

Never forget to switch the fuel valve back to off once you are done using it. This will reduce the chances of gas leaks.

Step 4: Turn the Ignition Switch On

Usually, it’s more like a normal switch where you just have to turn it into an “on” position.

Step 5: Insert the Key If You Are Required To

Some Snowblowers come with an extra precaution of a key, wherein in case of emergency you have to just remove it.

So you need to insert the key because otherwise, it won’t start.

Step 6: Primer Bulb Settings

Push this button a few times so that you start getting fuel circulated. If the temperature is above 15-degree Fahrenheit, do this twice.

Step 7: Get the Engine Started

Pull the starter rope slowly and when you feel the resistance then quickly pull upwards to get the engine started.

If your model has a power cord, plug it in to get it started. If your model has an electric start, press the start button.

Step 8: Turn the Choke Off

Let your snowblower warm-up for a few minutes, then turn the choke off.

After following these steps, you are good to go!

Final Thoughts

So, with the above-mentioned tips, get started with cleaning the snow easily and effortlessly with a snowblower.